TW95 Wheel Loader

Powerful and efficient, the Takeuchi TW95 delivers exceptional performance, comfort, and serviceability.  It is an ideal loader for a wide range of applications including load and carry, snow removal, and feedlots.  The cabin is spacious and features a deluxe high-back air ride seat with heat and armrest, single lever joystick control for all loader functions and directional changes (F-N-R), a proportional thumb wheel for auxiliary hydraulic functions, and rocker switches to control a wide range of machine functions.  A standard hydraulic quick coupler makes changing attachments quick and efficient.

The TW95 is powered by a 114 hp, Deutz TCD 3.6 L4 engine that is Final Tier 4 using an SCR and DOC exhaust after treatment system.  The hydrostatic drive is responsive and delivers excellent power for loading applications, and it also provides dynamic braking, slowing the loader as the operator backs off the throttle.  High-speed road gear is standard equipment and enables the loader to travel at speeds up to 24.8 mph for greater mobility and versatility.  100% locking differentials can be engaged at low speeds to provide maximum tractive effort in the most demanding conditions.  Maintenance and inspections are simple to perform on the TW95 due to the wide opening engine hood that provides access to key daily inspection points.

Product Details


EPA Final Tier 4 Emission Compliant
DOC / SCR Exhaust After Treatment
Water Cooled
Dual Element Air Cleaner with Restriction Indicator
High Capacity Radiator
Multi-Informational Monitor
12 volt System with 95 amp Alternator
Work Lights: Front and Rear
Driving Lights and Turn Signals
Directional Lights: Fwd / Rev
Engine Preheat
Back-up Alarm
Hydrostatic Drive with 100% Inching Pedal
100% Locking Differentials: Front and Rear
Outboard Planetary Drives
2 Speed Travel
Spring Applied Parking Brake
Multi-Wet Disc Brake
High Speed Road Gear with Ride Control (24.9 mph)
Heavy Duty Radial Tire Assembly (optional)
Precise and Responsive Pilot Controls
Proportional Thumb Wheel Located in Loader Joystick for Auxiliary Hydraulic Circuit
Auxiliary Hydraulic Lines Plumbed to End of Loader Arms
Auxiliary Hydraulic Detent
Hydraulic Oil Level Sight Gauge
High Capacity Hydraulic Oil Cooler
Auxiliary Hydraulics (26.4 gpm)
Z-Bar Linkage
Bucket Float Function
Mechanical Bucket Positioning
Heavy Duty Hydraulic Bucket Quick Coupler
Heavy Duty Self Aligning Loader Bushings with Oversized Pins
95" GP Bucket (2.00 yd3) (optional)
95" Light Duty Bucket w/ BOE (2.75 yd3)
95" Light Duty Bucket (8 tooth) (2.62 yd3) (optional)
HD 48" Pallet Forks and Frame (optional)
Enclosed Cab with Air Conditioning, Heat, Front and Rear Wipers, Front and Rear Washers, and Rear Defrost
ROPS / FOPS Protection
2" Retractable Seat Belt
Deluxe Air Suspension Seat with Heat
Large Steps and Grab Handles
Elevated Operator's Station
Multi-Functional Joystick for Machine Direction, Bucket Control, Loader Arms, Diff Lock, High Speed, and Auxiliary Controls
3" Retractable Seat Belt (optional)


Operating Weight - Cab18,188 lb (8,250 kg)
Tipping Load, Straight14,307 lb(6,490 kg)
Tipping Load, Full Turn12,652 lb(5,739 kg)
Operating Capacity, SAE J818*6,326 lb(2,870 kg)
Bucket Breakout Force15,873 lb(7,200 kg)
Lift Arm Breakout Force18,077 lb(8,200 kg)
Traction Force13,592 lb(6,165 kg)
Travel Speed - Low Range4.0 mph(6.5 km/hr)
Travel Speed - High Range12.4 mph(20.0 km/hr)
Optional High Speed Travel24.9 mph(40.0 km/hr)
* Rate Operating Capacity (ROC) for wheel loaders is rated with a bucket
according to SAE J818 at no more than 50% of the full turn tipping load.
Auxiliary Flow - Primary Circuit26.4 gpm(100.0 Lpm)
Auxiliary Flow - Optional Circuit26.0 gpm(98.0 Lpm)
Hydraulic System Pressure3,336 psi(23.0 MPa)
Make/ModelDeutz / TD 3.6 L4
Engine Displacement176.0 cu in(3.6 L)
Horsepower @ 2,200 rpm114.0 hp(85.0 kW)
Maximum Torque @ 1,600 rpm339.9 ft-lb(460.0 Nm)
Engine Lubrication9.5 qt(8.0 L)
Cooling System22.2 qt(21.0 L)
Fuel Tank Capacity31.7 gal(120.0 L)
Fuel Consumption (65% of Full Load)6.5 gal/hr(24.6 L/hr)
Hydraulic Reservoir Capacity28.0 gal(106.0 L)
Front Axle Lubrication7.6 qt(7.2 L)
Rear Axle Lubrication7.6 qt(7.2 L)


Max. Lift Height to Bucket Pin11 ft 10.5 in(6,187 mm)
Dump Height Fully Raised9 ft 3.3 in(2,828 mm)
Max. Reach Fully Raised2 ft 8.2 in(820 mm)
Dump Angle45°
Rollback Angle48°
Overall Length with Bucket20 ft 5.2 in(6,230 mm)
Overall Height9 ft 7.4 in(2,932 mm)
Overall Operating Height13 ft 10.0 in(4,220 mm)
Bucket Clearance Height9 ft 11.0 in(3,025 mm)
Wheel Base8 ft 2.4 in(2,500 mm)
Ground Clearance1 ft 9.2 in(540 mm)
Overall Width without Bucket7 ft 1.8 in(2,180 mm)
Outside Turning Radius15 ft 1.4 in(4,610 mm)
Inside Turning Radius7 ft 10.0 in (2,385 mm)
Recommended Bucket Width95.0 in(2,413 mm)

Four Pillars

Stay Informed – The ADS dash provides the operator with valuable machine service and operational information, controls the optional high speed road gear, features anti-theft capabilities, and has indicators for a variety of machine functions.

Excellent Power – The Deutz TD3.6L turbocharged engine is EPA Final Tier 4 compliant using a DOC/SCR exhaust aftertreatment system. It is fuel efficient and delivers outstanding power, quiet operation, and excellent performance.

Complete Functionality – The multi-function, proportional joystick allows the operator to be in complete control of all loader and directional functions, and it now includes a proportional thumb wheel for greater auxiliary hydraulic functionality.

Operator Convenience – The hydraulic quick coupler provides a heavy duty mount for attachments and is controlled from the operator’s seat for quick and easy attachment exchanges.

Be in Control – Travel speed may be controlled using the 100% inching pedal which allows the machine to be brought to a crawl/stop reducing wear on the brakes.

100% Differential Lock – Can be engaged at low speeds on both the front and rear axles (up to 4.0 mph)and delivers outstanding traction performance in the most demanding applications.

Strong and Durable – The outboard planetary drives allow for larger bearings to be utilized and house oil separately from the differentials.  This keeps the oil cleaner and reduces heat extending component life and durability.

Powerful Performer – The exceptionally strong and durable Z-bar loader linkage features powerful breakout forces, heavy lifting capabilities, and it is ideal for excavating and stock pile loading.

Keep it Cool – The side-by-side, high capacity cooling module allows the machine to run cooler and more efficiently for greater component life and performance.

Heavy Duty Axles – Rigid Spicer axles provide excellent durability and strength for years of service.

Simple and Durable – All cylinders are mounted on spherical bearings that are durable, easy to replace, and have no alignment issues.

Protect the Rear – The rear counterweight provides excellent stability, features a low profile design, and protects the engine and hydraulic components from damage.

ADS Monitor Panel – Is easy to view and provides the operator with a great deal of operational data.

Year Round Comfort – Factory air conditioner and heater are standard equipment on the TW95 providing a comfortable operator’s environment throughout the year.

Well Appointed Cab – Features a deluxe cloth air suspension seat with heat, multiple adjustments, and fold-able arm rest for excellent comfort.

Comfortable Steering Position – The tilt steering column has been improved allowing for easier adjustments to improve operator comfort.

See More – The elevated operator’s station provides excellent panoramic visibility for greater peace of mind.

Easy Entry and Exit – The large grab handle and well positioned non-skid steps allow the operator to enter and exit the cabin securely and easily.

Open Up – The rear engine cover opens to the rear providing outstanding access to key maintenance points.

Easy Access – The hydraulic tank, radiator, and dual element air cleaners are protected and easily accessed under the engine hood.

Low Maintenance – The Deutz TD3.6L turbocharged engine is EPA Final Tier 4 compliant using a DOC/SCR exhaust aftertreatment system.

Simplified Maintenance – Centrally located grease fittings are easily accessed improving serviceability and minimizing downtime.

Secure for Transport – Large anchor points on the rear counterweight and loader frame allow the machine to be easily secured for transport.