| OPERATING PERFORMANCE | ||
|---|---|---|
| Operating Weight - Canopy | 11,650 lb | (5,285 kg) |
| Operating Weight - Cab | 11,980 lb | (5,435 kg) |
| Tipping Load | 7,825 lb | (3,550 kg) |
| Rated Operating Capacity (ISO 14397-1)@35%* | 2,735 lb | (1,240 kg) |
| Operating Capacity w/ Opt Counterweight | 2,735 lb | (1,233 kg) |
| Operating Load at 50% of Tipping Load | 3,913 lb | (1,775 kg) |
| Bucket Breakout Force | 7,958 lb | (3,610 kg) |
| Lift Arm Breakout Force | 7,126 lb | (3,232 kg) |
| Traction Force | 13,196 lb | (5,986 kg) |
| Ground Pressure - Canopy | 4.71 psi | (32.5 kPa) |
| Ground Pressure - Cab | 4.84 psi | (33.4 kPa) |
| Travel Speed - Low | 4.8 mph | (7.8 km/h) |
| Travel Speed - High | 7.5 mph | (12.0 km/h) |
| *Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load. | ||
| HYDRAULIC SYSTEM | ||
| Auxiliary Flow - Primary Circuit | 23.1 gpm | (87.6 L/min) |
| Auxiliary Flow - Secondary Circuit | 23.1 gpm | (87.6 L/min) |
| Auxiliary Flow - High Flow (optional) | 40.5 gpm | (153.4 L/min) |
| Hydraulic System Pressure | 3,480.9 psi | (24 MPa) |
| ENGINE | ||
| Make / Model | Kubota / V3800-TIE5B | |
| Engine Displacement | 230 cu in | (3.8 L) |
| Horsepower @ 2,600 rpm | 107.3 hp | (80 kW) |
| Maximum Torque @ 1,500 rpm | 271.4 ft-lb | (368 Nm) |
| FLUID CAPACITIES | ||
| Engine Lubrication | 14 qt | (13.2 L) |
| Cooling System | 16.9 qt | (16 L) |
| Fuel Tank Capacity | 33.4 gal | (126.5 L) |
| Hydraulic Reservoir Capacity | 15.6 gal | (58.9 L) |
| Hydraulic System Capacity | 22.2 gal | (84 L) |
| DEF Tank Capacity | 4.8 gal | (18 L) |
| Fuel Consumption (65% of Full Load) | 3.9 gal/h | (14.8 L/h) |
TL11R3 Specs
TL11R3 Dimensions
| MACHINE DIMENSIONS | ||
|---|---|---|
| Overall Operating Height | 13 ft 11.1 in | (4,245 mm) |
| Max. Lift Height to Bucket Pin | 10 ft 6.0 in | (3,200 mm) |
| Dump Height Fully Raised | 7 ft 11.3 in | (2,420 mm) |
| Dump Reach Fully Raised | 2 ft 11.2 in | (895 mm) |
| Dump Angle | 40° | |
| Rollback Angle | 30° | |
| Track Ground Contact Length | 5 ft 2.8 in | (1,595 mm) |
| Machine Length | 9 ft 11.3 in | (3,030 mm) |
| Transport Length | 12 ft 8.6 in | (3,875 mm) |
| Transport Height | 7 ft 7.7 in | (2,330 mm) |
| Departure Angle | 29° | |
| Clearance Circle with Bucket | 8 ft 0.8 in | (2,460 mm) |
| Clearance Circle without Bucket | 4 ft 10.6 in | (1,490 mm) |
| Clearance Circle Rear | 5 ft 10.2 in | (1,785 mm) |
| Track Width | 17.7 in | (450 mm) |
| Ground Clearance | 12.4 in | (315 mm) |
| Overall Width without Bucket | 6 ft | (1,830 mm) |