TL10V2 Specs

Operating Weight - Canopy9,950 lb(4,515 kg)
Operating Weight - Cab10,270 lb(4,660 kg)
Tipping Load7,205 lb(3,268 kg)
Rated Operating Capacity (ISO 14397-1)@35%*2,522 lb(1,144 kg)
Operating Load at 50% of Tipping Load3,600 lb(1,633 kg)
Bucket Breakout Force6,520 lb(2,957 kg)
Lift Arm Breakout Force5,400 lb(2,450 kg)
Traction Force9,730 lb(4,413 kg)
Ground Pressure - Canopy4.9 psi(34.3 kPa)
Ground Pressure - Cab5.1 psi(35.4 kPa)
Travel Speed - Low4.8 mph(7.7 km/hr)
Travel Speed - High7.0 mph(11.3 km/hr)
*Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.
Auxiliary Flow - Primary Circuit18.8 gpm(71.2 Lpm)
Auxiliary Flow - High Flow (optional)32.8 gpm(124.0 Lpm)
Hydraulic System Pressure3,481 psi(21.0 MPa)
Make / ModelKubota / V3307CR-TE4B
Engine Displacement203 cu in(3.3 L)
Horsepower @ 2,600 rpm74.3 hp(55.4 kW)
Maximum Torque @ 1,500 rpm195 ft-lb(265.0 Nm)
Engine Lubrication11.8 qt(11.2 L)
Cooling System15.9 qt(15.0 L)
Fuel Tank Capacity21.5 gal(81.0 L)
Fuel Consumption (65% of Full Load)2.7 gal/hr(10.3 L /hr)
Hydraulic Reservoir Capacity9.5 gal(36.0 L)
Hydraulic System Capacity17.2 gal(65.0 L)

TL10V2 Dimensions

Max. Lift Height to Bucket Pin10 ft 4.8 in(3,169 mm)
Dump Height Fully Raised7 ft 11.9 in(2,435 mm)
Dump Reach Fully Raised3 ft 1.4 in(950 mm)
Dump Angle40°
Rollback Angle30°
Track Ground Contact Length4 ft 7.9 in(1,419 mm)
Machine Length9 ft 7.2 in(2,925 mm)
Transport Length12 ft 1.0 in(3,680 mm)
Transport Height7 ft 5.4 in(2,270 mm)
Departure Angle30°
Clearance Circle with Bucket7 ft 8.5 in(2,350 mm)
Clearance Circle without Bucket5 ft 0 in(1,535 mm)
Clearance Circle Rear5 ft 5.2 in(1,655 mm)
Track Width15.7 in(400 mm)
Ground Clearance12.6 in(320 mm)
Overall Width without Bucket5 ft 8.5 in(1,740 mm)