TB280FR Specs

Operating Weight - Cab (Rubber)18,810 lb(8,530 kg)
Operating Weight - Cab (Steel)19,240 lb(8,730 kg)
Maximum Bucket Breakout Force16,335 lb(7,409 kg)
Maximum Arm Digging Force7,037 lb(3,192 kg)
Arm Length6 ft 7.0 in(2,000 mm)
Slew Speed10.0 rpm
Traction Force19,783 lb(8,973 kg)
Ground Pressure - Cab (Rubber)5.5 psi(38.1 kPa)
Ground Pressure - Cab (Steel)5.7 psi(39.5 kPa)
Travel Speed - Low Range1.7 mph(2.7 km / hr)
Travel Speed - High Range3.2 mph(5.2 km / hr)
Total Hydraulic Flow52.5 gpm(198.0 L / min)
Auxiliary Flow - Primary Circuit39.0 gpm(148.0 L / min)
Auxiliary Flow - Secondary Circuit15.0 gpm(58.0 L / min)
Hydraulic System Pressure3,990 psi(27.5 MPa)
Make / ModelYanmar / 4TNV98CT
Displacement202 cu in(3.3 L)
Horsepower @2,000 rpm69.2 hp(51.6 kW )
Maximum Torque @ 1,300 rpm22.7.2 ft-lb(308 Nm )
Engine Lubrication9.9 qt(9.4 L)
Cooling System14.8 qt(14.0 L)
Fuel Tank Capacity26.3 gal(100.0 L)
Fuel Consumption (65% of Full Load)2.5 gal / hr(9.1 L / hr)
Hydraulic Reservoir Capacity18.7 gal(71.0 L)
Hydraulic System Capacity38.8 gal(147.0 L)

TB280FR Dimensions

Maximum Reach23 ft 7.2 in(7,195 mm)
Maximum Reach at Ground Level23 ft 1.4 in(7,045 mm)
Maximum Digging Depth14 ft 11.0 in(4,540 mm)
Maximum Vertical Digging Depth11 ft 5.5 in(3,495 mm)
Maximum Dig Height21 ft 2.0 in(6,465 mm)
Maximum Dumping Height14 ft 8.4 in(4,480 mm)
Front Swing Radius9 ft 5.4 in(2,880 mm)
Front Swing Radius with Boom Offset5 ft 3.5 in(1,610 mm)
Tail Swing (Slew) Radius4 ft 2.4 in(1,280 mm)
Transport Length20 ft 7.4 in(6,285 mm)
Transport Height8 ft 11.4 in(2,725 mm)
Ground Clearance12.3 in(315 mm)
Undercarriage Length9 ft 4.0 in(2,855 mm)
Track Width (Rubber)17.7 in(450 mm)
Undercarriage Width7 ft 7.0 in(2,300 mm)