TB250-2 Specs

OPERATING PERFORMANCE  
Operating Weight - Canopy10,957 lb(4,970 kg)
Operating Weight - Cab 11,288 lb(5,120 kg)
Maximum Bucket Breakout Force10,430 lb (4,731 kg)
Maximum Arm Digging Force5,261 lb(2,386 kg)
Arm Length5 ft 9.2 in(1,760 mm)
Slew Speed9.5 rpm
Traction Force12,320 lb(5,588 kg)
Ground Pressure - Cab (Rubber)4.2 psi(29.0 kPa)
Ground Pressure - Cab (Steel)4.4 psi(30.0 kPa)
Travel Speed - Low Range1.7 mph(2.8 km / hr)
Travel Speed - High Range3.2 mph(5.2 km / hr)
HYDRAULIC SYSTEM
Total Hydraulic Flow40.9 gpm(155.3 L / min)
Auxiliary Flow - Primary Circuit24.2 gpm(91.7 L / min)
Hydraulic System Pressure3,481 psi(24.0 MPa)
ENGINE
Make / ModelYanmar / 4TNV88C-PTB
Displacement133.6 cu in(2.2 L)
Horsepower @ 2,400 rpm39.0 hp(29.1 kW)
Maximum Torque @ 1,440 rpm106.9 ft-lb(144.9 Nm)
FLUID CAPACITIES
Engine Lubrication7.8 qt(7.4 L)
Cooling System7.4 qt(7.0 L)
Fuel Tank Capacity18.5 gal(70.0 L)
Fuel Consumption (65% of Full Load)1.45 gal / min(5.5 L / hr)
Hydraulic Reservoir Capacity11.9 gal(45.0 L)
Hydraulic System Capacity25.1 gal(95.0 L)

TB250-2 Dimensions

MACHINE DIMENSIONS  
Maximum Reach20 ft 1.0 in(6,120 mm)
Maximum Reach at Ground Level19 ft 7.6 in(5,985 mm)
Maximum Digging Depth12 ft 4.8 in(3,780 mm)
Maximum Vertical Digging Depth9 ft 9.5 in(2,985 mm)
Maximum Dig Height18 ft 6.6 in(5,655 mm)
Maximum Dumping Height13 ft 3.3 in(4,045 mm)
Front Swing Radius7 ft 7.7 in(2,330 mm)
Front Swing Radius with Boom Offset6 ft 0.8 in(1,850 mm)
Tail Swing (Slew) Radius4 ft 5.5 in(1,360 mm)
Transport Length18 ft 0.3 in(5,495 mm)
Transport Height8 ft 5.2 in(2,570 mm)
Ground Clearance13.2 in(335 mm)
Undercarriage Length8 ft 2.4 in(2,500 mm)
Track Width (Rubber)15.7 in(400 mm)
Undercarriage Width6 ft 0.0 in(1,839 mm)