Takeuchi US
Home » Products » Wheel Loaders » TW80 SERIES 2

TW80 SERIES 2

The TW65 SERIES 2 and the TW80 SERIES 2 provide many features that operator's demand on today's compact wheel loaders. These loaders now feature a standard operator's cabin with factory installed air conditioner and heater for improved operator comfort in all weather conditions. The new water cooled Deutz powerplants are Final Tier 4 compliant using only the diesel oxidation catalyst which simplifies maintenance and reduces downtime. Additionally, both models are now available with road gear allowing them to travel at speeds up to 25 mph, high flow auxiliary hydraulics that provide greater attachment versatility, and ride control for improved load retention and improved ride characteristics. Couple these new features with the loaders already impressive reach and dump height and you have a loader that is ideal for a wide variety of applications.


Click the links below to view product specifications.

OPERATING PERFORMANCE
Loader Boom Linkage Type Z-bar pattern
Operating Weight (w 165 lb operator) Standard machine with bucket  12,700 lb (5,760 kg)
Tipping Load, Straight  10,065 lb (4,565 kg)
Tipping Load, Full Turn  8,890 lb (4,033 kg)
Rated Operating Capacity with bucket * (SAE J818)  4,445 lb (2,016 kg)
Bucket Breakout Force  13,691 lb (6,210 kg)
Lift Arm Breakout Force  12,147 lb (5,510 kg)
Traction Force  11,574 lb (5,250 kg)
Cycle Time  
   Raise - Full Load 6.0 (Seconds)   
   Lower - No Load 3.8 (Seconds)   
   Dump - Full Load 1.2 (Seconds)   
*Operating Capacity is 50% of full turn tipping load with bucket according to SAE J818 
ENGINE
Make/Model
Deutz TD2.9 L Turbo
Tier Rating
EPA Final Tier 4
Cylinders/Displacement
4 /176 cu in (2.9 L)
Horsepower
 73.0 hp (54.0 kW)
Rated Engine Speed
 2,200 rpm
Maximum Torque
 192.0 ft-lb @ 1800 rpm (260 Nm)
Engine Lubrication
11.6 qt (11.0 L)
Fuel Tank Capacity
26.4 gal (100.0 L)
Fuel Consumption (65% of full load)
 2.6 gal/hr (10.0 L/hr)
Electrical System
 12 volts / 95 amps
DRIVE TRAIN
Transmission Type
Hydrostatic Drive with 100% Hydraulic Inching Pedal
Axle Type Rigid Axles With Outboard Planetary Reduction
Differential Lock 100% Differential Lock in Front and Rear Axles
Parking Brake Spring Applied, Hydraulically Released, Multiple Wet Friction Disk
Service Brakes Hydrostatic and Multi Wet Friction Disk
Steering Articulation 40 Degrees Left / 40 Degrees Right
Frame Oscillation 12 Degrees Left / 12 Degrees Right
Maximum Travel Speed Road Gear 24.8 mph (40 km/hr)
Low Range 4.0 mph (6.5 km/hr)
High Range 12.4 mph (20 km/hr)
HYDRAULIC SYSTEM
Hydraulic Reservoir Capacity
14.0 gal (53.0 L)
Auxiliary Hydraulic Flow
16.4 gal/min (62.0 L/min)
High Auiliary Hydraulic Flow
26.0 gal/min (98.0 L/min)
Auxiliary Hydraulic Pressure
 3,335 psi (23.0 MPa)
DIMENSIONS
Wheelbase
7 ft 2.6" in (2,200 mm)
Outside Turning Radius
 13 ft 3 in (4046 mm)
Max Lift Height to Bucket Pin
 11 ft 1 in (3,380 mm)
Bucket Clearance Height
 9 ft 11 in (3,025 mm)
Dump Height Fully Raised
 8 ft 6 in (2,605 mm)
Max Dump Angle Fully Raised
 45 Degrees
Max Bucket Rollback at Ground Level
 48 Degrees
Reach Fully Raised
 2 ft 5 in (740 mm)
Overall Width Without Bucket
 6 ft 9 in (2,050 mm)
Overall Height
 8 ft 11.5 in (2,730 mm)
Overall Length With Bucket
 18 ft 3 in (5,580 mm)
Minimum Ground Clearance
 18.5 in (470 mm)
Loader operating information and dimensions are based on the standard machnine configuration, 1.3 cu. yd. bucket, 400 170 R20 tires, 165 lb (75 kg) operator.This information is affected by different configurations and attachments.
FEATURES

ENGINE

  • EPA Final Tier 4 compliant with DOC, turbocharged, water cooled
  • Dual element air cleaners with restriction indicator
  • High capacity radiator

ELECTRICAL

  • Electronic engine monitoring system with fuel gauge, high beam indicator, turn signal indicators, high speed indicator
  • 12 Volt system with 95 amp alternator
  • Work lights, front and rear
  • Driving lights and turn signals
  • Directional lights, Fwd / Rev
  • Engine preheat
  • Back-up alarm
  • Horn

DRIVE TRAIN

  • Hydrostatic drive with 100% inching pedal
  • 100% Locking differentials, front and rear
  • Outboard planetary drives
  • 2-Speed travel
  • Spring applied parking brake
  • Multi wet disc brake
  • Available Heavy duty construction tire assembly
  • Available Flotation tire assembly
  • Available High speed road gear, 24.8 mph top speed

HYDRAULIC

  • Pilot controls with thumb wheel control for auxiliary hydraulics
  • Auxiliary lines plumbed to the end of the loader arms
  • Auxiliary hydraulic detent
  • Hydraulic system test ports
  • Hydraulic oil level sight gauge
  • Remote mounted hydraulic oil cooler

WORKING EQUIPMENT

  • Z-bar loader linkage
  • Bucket float function
  • Mechanical bucket positioning
  • Hydraulic bucket quick coupler
  • Available 81.5" GP Combo bucket (1.30 cu yd)
  • Available 82" Bolt-on blade
  • Available Combo hitch to universal SSL adaptor
  • Available HD 48" Pallet forks and frame
  • Available Flat face hydraulic coupler kit

OPERATOR'S STATION

  • ROPS / FOPS Cab with front and rear wipers, rear window defrost, and factory installed HVAC
  • 2" Retractable seat belt
  • Deluxe suspension seat with arm rest
  • Large steps and grab handles
  • Elevated operator's station
  • Multi-function joystick for machine direction (Fwd / Rev), and loader controls (Raise, Lower, Curl, Dump)
  • Available 3" Retractable seat belt

©2014 Takeuchi Manufacturing [US], Ltd. All Rights Reserved.
Equipment depicted on this website may include optional equipment.