Takeuchi US
Home » Products » Wheel Loaders » TW40

TW40

The TW40 wheel loader features a very compact design that allows it to easily maneuver in tight spaces with minimal damage to lawns, pavement, or other sensitive surfaces.  It is at home in a wide variety of applications and features a standard universal hydraulic skid steer style coupler for greater attachment versatility.  The two speed hydrostatic transmission allows the TW40 achieve a top speed of 12.4 mph so it can easily move material around the jobsite.  A spacious operator's station is elevated giving the operator exceptional visibility and jobsite awareness, and the 100% inching pedal allows the operator to control travel speed independently of engine speed for reduced engine and brake wear.  The impressive power and precise control of the TW40 delivers increased productivity, and lower operational and maintenance costs making it a great alternative to the skid steer loader.  

Click the links below to view product specifications.

OPERATING PERFORMANCE
Loader Boom Linkage Type
Z-Bar
Operating Weight
Canopy 7,275 lb (3,300 kg)
Tipping Load, Straight
5,842 lb (2,650 kg)
Tipping Load, Full Turn
5,291 lb (2,400 kg)
ROC with bucket * (SAE J818)
2,645 lb (1,200 kg)
Bucket Breakout Force
7,126 lb (3,232 kg)
Lift Arm Breakout Force
5,260 lb (2,386 kg)
Traction Force
5,620 lb (2,500 kg)
Cycle Time
 
   Raise - Full Load
4.0 (Seconds)  
   Lower - No Load
3.5 (Seconds)  
   Dump - Full Load
1.0 (Seconds)  
*Operating capacity is 50% of full turn tipping load with bucket according to SAE J818
ENGINE
Make/Model
Perkins 403D-15T Water Cooled
Tier Rating
EPA Interim Tier 4
Cylinders/Displacement
3 / 91 cu in (1.49 L)
Horsepower
39.4 hp (29.4 kW)
Rated Engine Speed
2,800 rpm
Maximum Torque
82.6 ft-lb @ 1,800 rpm (112 Nm)
Engine Lubrication
3.1 qt (3.0 L)
Cooling system (Water)
6.3 qt (6.0 L)
Fuel Tank Capacity
18.5 gal (70.0 L)
Electrical System
12 volts / 50 amps
DRIVE TRAIN
Transmission Type
Hydrostatic Drive with 100% Hydraulic Inching Pedal
Axle Type
Rigid Axles With Outboard Planetary Reduction
Traction Aid
45% Differential Lock in Front
Parking Brake
Lever Operated Drum Brake
Service Brakes
Hydrostatic with Hydraulic Drum Brake
Steering Articulation
40 Degrees Left / 40 Degrees Right
Frame Oscillation
12 Degrees Left / 12 Degrees Right
Maximum Travel Speed
 
Low Range
4 mph (6.5 km/hr)
High Range
12.4 mph (20 km/hr)
HYDRAULIC SYSTEM
Hydraulic Reservoir Capacity
7.4 gal (28 L)
Auxiliary Hydraulic Flow
10.3 gal/min (39 L/min)
Auxiliary Hydraulic Pressure
3,988 psi (27.5 MPa)
DIMENSIONS
Wheelbase
5 ft 7.5 in (1,715 mm)
Outside Turning Radius
10 ft 4 in (3,150 mm)
Max Lift Height to Bucket Pin
10 ft 8.7 in (3,270 mm)
Bucket Clearance Height
9 ft 7.7 in (2,940 mm)
Dump Height Fully Raised
7 ft 8 in (2,340 mm)
Max Dump Angle Fully Raised
45 Degrees
Max Bucket Rollback at Ground Level
48 Degrees
Reach Fully Raised
2 ft 8.5 in (825 mm)
Overall Width Without Bucket
4 ft 11 in (1,500 mm)
Overall Height
8 ft 0 in (2,447 mm)
Overall Length With Bucket
14 ft 3.4 in (4,355 mm)
Minimum Ground Clearance
15.7 in (400 mm)
Loader operating information and dimensions are based on the standard machnine configuration, 0.66 cu. yd. bucket, heavy duty 31 x 15.5 - 15 tires, 165 lb (75 kg) operator.  This information is affected by different configurations and attachments.
FEATURES

ENGINE

  • EPA Interim Tier 4 compliant, water cooled
  • Extended life coolant
  • Dual element air cleaners with restriction indicator
  • Heavy duty radiator and oil cooler

ELECTRICAL

  • Electronic engine monitoring system with high beam indicator, turn signal indicators, high speed indicator
  • 12 Volt system with 65 amp alternator
  • Work lights, front and rear
  • Driving lights and turn signals
  • Directional lights, Fwd / Rev
  • Engine preheat
  • Back-up alarm
  • Horn

DRIVE TRAIN

  • Hydrostatic drive with 100% inching pedal
  • 45% Limited slip differential, front
  • Outboard planetary drives
  • 2-Speed travel
  • Cable operated parking brake
  • Hydraulic drum service brake
  • Available Heavy duty 31 x 15.5 - 15 construction tire assembly

HYDRAULIC

  • Heavy duty hydraulic SSL style quick attach coupler
  • Auxiliary lines plumbed to the end of the loader arms
  • Auxiliary hydraulic detent for continuous operation
  • Hydraulic system test ports
  • Hydraulic oil level sight gauge
  • Loader arm float

WORKING EQUIPMENT

  • Z-bar linkage
  • Powerful bucket and lift arm breakout forces
  • Bucket float function
  • Heavy duty self aligning loader bushings with oversized pins
  • Available 60" High capacity bucket with SSL hitch (0.66 yd³)
  • Available Bolt-on tooth bart for 60" bucket
  • Available Bolt-on reversible cutting edge for 60" bucket
  • Available Flat face hydraulic connector kit

OPERATOR'S STATION

  • Fold down ROPS / FOPS guard
  • Deluxe lighting package for work, driving, and signal lights
  • Large steps and grab handles
  • Elevated operator's station
  • Multi function joystick for machine direction (Fwd  /Rev), loader controls (Raise, Lower, Curl, Dump) 
  • 2" Retractable seat belt
  • Adjustable suspension seat with arm rest

©2015 Takeuchi Manufacturing [US], Ltd. All Rights Reserved.
Equipment depicted on this website may include optional equipment.