TW80 Series 3 Specs

OPERATING PERFORMANCE  
Operating Weight - Cab12,700 lb (5,760 kg)
Tipping Load, Straight9,742 lb(4,419 kg)
Tipping Load, Full Turn8,602 lb(3,902 kg)
Operating Capacity, SAE J818*4,301 lb(1,951 kg)
Bucket Breakout Force13,960 lb(6,333 kg)
Lift Arm Breakout Force12,387 lb(5,618 kg)
Traction Force12,049 lb(5,466 kg)
Travel Speed - Low Range4.0 mph(6.5 km/hr)
Travel Speed - High Range12.4 mph(20.0 km/hr)
Optional High Speed Travel24.8 mph(40.0 km/hr)
* Rate Operating Capacity (ROC) for wheel loaders is rated with a bucket
according to SAE J818 at no more than 50% of the full turn tipping load.
HYDRAULIC SYSTEM
Auxiliary Flow - Primary Circuit16.4 gpm(62.0 Lpm)
Auxiliary Flow - Optional Circuit26.0 gpm(98.0 Lpm)
Hydraulic System Pressure3,335 psi(23.0 MPa)
ENGINE
Make/ModelDeutz / TD2.9L Turbo
Engine Displacement176.0 cu in(2.9 L)
Horsepower @ 2,200 rpm73.0 hp(54.0 kW)
Maximum Torque @ 1,800 rpm192.0 ft-lb(260.0 Nm)
FLUID CAPACITIES
Engine Lubrication8.5 qt(8.0 L)
Cooling System13.7 qt(13.0 L)
Fuel Tank Capacity26.4 gal(100.0 L)
Fuel Consumption (65% of Full Load)2.6 gal/hr(10.0 L/hr)
Hydraulic Reservoir Capacity22.2 gal(84.0 L)
Front Axle Lubrication5.7 qt(5.4 L)
Rear Axle Lubrication5.4 qt(5.1 L)

TW80 Series 3 Dimensions

MACHINE DIMENSIONS  
Max. Lift Height to Bucket Pin11 ft 1.0 in(3,380 mm)
Dump Height Fully Raised8 ft 6.0 in(2,605 mm)
Max. Reach Fully Raised2 ft 5.0 in(740 mm)
Dump Angle45°
Rollback Angle48°
Overall Length with Bucket18 ft 3.0 in(5,580 mm)
Overall Height8 ft 11.5 in(2,730 mm)
Overall Operating Height13 ft 10.0 in(4,220 mm)
Bucket Clearance Height9 ft 11.0 in(3,025 mm)
Wheel Base7 ft 2.6 in(2,200 mm)
Ground Clearance1 ft 6.5 in(470 mm)
Overall Width without Bucket6 ft 9.0 in(2,050 mm)
Turning Radius at Bucket Edge14 ft 8.0 in(4,478 mm)
Outside Turning Radius13 ft 3.0 in(4,046 mm)
Inside Turning Radius6 ft 3.0 in (1,898 mm)
Recommended Bucket Width81.5 in(2,070 mm)