TL12R2 Compact Track Loader

The TL12R2 features a radial lift loader arrangement and sets another benchmark for compact track loaders by delivering one of the most capable and innovative machines available to the market today.  The cab has been completely redesigned and enlarged and now features a smooth low effort overhead door design for improved entry and egress. A quiet ride track design with flotation pads reduces vibration, noise levels, and improves ride quality.

Product Details


EPA Final Tier 4 Emission Compliant
Turbocharged and Intercooled
DOC+DPF+SCR Exhaust After Treatment
Automatic Fuel Bleed System
Active Power Control Power Management System
Working Modes - Power and ECO
Dual Element Air Filter
High Capacity Radiator, Hydraulic Oil Cooler and Intercooler Mounted Side-by-Side on Swing Out Frame
Sealed Rocker Switches
12 volt System with 80 amp Alternator
LED: Two Front and Two Rear
Engine Preheat
Hour Meter
Back-up Alarm
Double Reduction Planetary Drives
Permanently Sealed Track Rollers with Metal Face Seals
Fully Welded Frame with Integrated Cross Members
2 Speed Travel
17.7" Rubber Track
Grease Type Track Adjuster
Front and Rear Tie-Down Points and Lift Points
Rear Bumper Integrated into Frame
5.7" Color Multi-Informational Display with Rear Camera
Tilt-up Operator's Station
Deluxe High Back Suspension Seat
Rear Pivoting Lap Bar with Arm Rest
ROPS / FOPS Structure
Dial Throttle Control
Retractable 2" Seat Belt
Foot Throttle
Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper, and AM / FM / MP3 Radio with NOAA Weatherband (optional)
Retractable 3" Seat Belt (optional)
3 Point Retractable Seat Belt (optional)
Polycarbonate Door and Top Guard (High Flow Only)
Hydraulic Pilot Controls
Boom Float with Detent
Cushioned Boom Cylinders
Proportional Auxiliary Controls with Detent
Hydraulic Self Leveling
Pressure Relieving Flat Faced Coupler Body
High Capacity Steel Hydraulic Tank
14-Pin Connector with Push Button Control
Mechanical Quick Coupler
Hydraulic Quick Coupler Cab - Standard Equipment
Hydraulic Quick Coupler Canopy - Optional
Primary Flow Auxiliary Hydraulics 23.2 gpm
High Flow Auxiliary Hydraulics 40.4 gpm (optional)
Secondary Auxiliary Circuit 23.2 gpm (optional with High Flow only)
Ride Control (optional)
Pattern Change Valve (ISO or H) (optional)


Operating Weight - Canopy12,300 lb(5,580 kg)
Operating Weight - Cab12,590 lb(5,710 kg)
Tipping Load8,629 lb(3,915 kg)
Rated Operating Capacity
(ISO 14397-1) @35%*
2,975 lb(1,349 kg)
Operating Load @ 50% of Tip Load4,315 lb(1,957 kg)
Bucket Breakout Force8,210 lb(3,722 kg)
Lift Arm Breakout Force8,075 lb(3,663 kg)
Traction Force14,010 lb(6,353 kg)
Ground Pressure - Canopy4.58 psi(31.6 kPa)
Ground Pressure - Cab4.68 psi(32.3 kPa)
Travel Speed - Low5.0 mph(8.1 km/hr)
Travel Speed - High7.3 mph(11.8 km/hr)
*Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.
Make / ModelKubota / V3800TIF4B-Turbo Intercooled
Engine Displacement230 cu in(3.8 L)
Horsepower @ 2,400 rpm111.3 hp(83.0 kW)
Maximum Torque @ 1,500 rpm276 ft-lb(374 Nm)
Auxiliary Flow - Primary Circuit23.2 gpm(88.0 Lpm)
Auxiliary Flow - High Flow (optional)40.4 gpm(153.0 Lpm)
Auxiliary Flow - Secondary Circuit (optional)23.2 gpm(88.0 Lpm)
Hydraulic System Pressure3,481 psi(24.0 MPa)
Engine Lubrication13.9 qt(13.2 L)
Cooling System19.0 qt(18.0 L)
Fuel Tank Capacity31.6 gal(119.5 L)
DEF Fluid Tank Capacity4.8 gal(18.0 L)
Fuel Consumption (65% of Full Load)3.8 gal/hr(14.4 L /hr)
Hydraulic Reservoir Capacity13.2 gal(50.0 L)
Hydraulic System Capacity22.5 gal(85.0 L)


Max. Lift Height to Bucket Pin10 ft 6.0 in(3,200 mm)
Dump Height Fully Raised7 ft 10.5 in(2,400 mm)
Dump Reach Fully Raised3 ft 1.8 in(960 mm)
Dump Angle42°
Rollback Angle30°
Track Ground Contact Length5 ft 7.5 in(1,716 mm)
Machine Length10 ft 6.2 in(3,205 mm)
Transport Length13 ft 3.3 in(4,045 mm)
Transport Height7 ft 7.0 in(2,311 mm)
Departure Angle30°
Clearance Circle with Bucket8 ft 4.6 in(2,555 mm)
Clearance Circle without Bucket5 ft 4.4 in(1,635 mm)
Clearance Circle Rear6 ft 0 in(1,829 mm)
Track Width17.7 in(450 mm)
Ground Clearance12.5 in(320 mm)
Overall Width without Bucket6 ft 5.2 in(1,960 mm)

Takeuchi Fleet Management

2 Year Standard Service
Minimize Downtime
Remote Diagnostics
Utilization Tracking
Proactive Maintenance
Control Costs

TFM Brochure

Four Pillars

Powerful and Efficient – The turbocharged, intercooled engine delivers an excellent blend of power and performance and it features a DOC+DPF+SCR exhaust after treatment system

Active Power Control – Maintains engine power for optimal performance, and it may be engaged or disengaged by the operator.

Quiet Ride Track – Allows rollers to ride on a rubber contact pad for reduced vibration and a quieter ride, and the wide block tread improves flotation.

Radial Lift Loader – Is designed to deliver excellent mid-height reach and unmatched performance in the toughest applications.

Multiple Working Modes – Standard mode delivers maximum power and performance. ECO mode reduces fuel consumption and is ideal for less demanding applications.

Front and Rear LED Work Lights – Provide excellent illumination in low light conditions for greater peace of mind.

Heavy Duty Lift Cylinders – Are over built for greater durability and deliver exceptional lifting performance.

Oversized Pins and Bushings – For greater strength where it matters.

Purpose Built Frame – Features multiple cross members for greater strength and rigidity.

Heavy Duty Cross Member – Protects bucket cylinders from damage and it has been lowered for improved attachment visibility.

High Capacity Cooling Module – Enables machine to run cooler and more efficiently for improved component life and attachment efficiency.

Rear Bumper with Tie Downs – Delivers greater protection to the rear of the machine and simplifies anchoring the machine for transport.

Advanced Interior Design – Features a spacious cabin, improved functionality, updated rocker switch layout, 12v accessory outlet, and multiple cup holders.

Color Multi-Informational Display – Features a 5.7″ full color display that provides the operator with pertinent machine information, allows the operator to adjust hydraulic flow from the seat, and has a wide range of attachment presets that can be set-up.

Pilot Joystick Controls – Respond immediately to operator input for greater control and performance, and they are low effort for excellent comfort.

Deluxe High Back Suspension Seat – Allows the operator to remain comfortable through out the workday by providing a wide array of settings that include adjustments for height which also improves attachment visibility.

Rear View Camera- Allows operator full view of the rear of the machine on the in cab 5.7″ color display.

Fuel and DEF Fluid Fill – Features an audible alarm that alerts the operator when the fluid level is nearing the fill point reducing spills and clean-up.

Remote Fuel and Engine Oil Filters – Are positioned together beneath the tilt up cabin for greater convenience, and they spin-on from the bottom resulting in minimal clean-up.

Simplified Battery Access – Is available through a bolt-on panel located on the left tower.

Rear Tower Clean-outs – Are accessible through the right/left towers for convenience, easy inspection, and cleaning.