Takeuchi US
Home » Products » Compact Excavators » TB240

TB240

Takeuchi continues to raise the bar with the TB240 compact excavator.  With many updates and improvements, the TB240 is characterized by its redesigned exterior that provides a modern appearance, better visibility, and improved service access. A well appointed, automotive styled interior includes a multi-function monitor, function switches, electronic throttle control, pilot controls with a proportional slide switch to control auxiliary hydraulic functions, and adjustable arm rests.  The TB240 now features a more powerful four cylinder engine that delivers over 20% more horsepower, provides smooth efficient power, and is Final Tier 4 compliant meeting the latest EPA emissions requirements.

  
Click the links below to view product specifications.

OPERATING PERFORMANCE
Operating Weight Canopy (w 165 lb operator)
8,289 lbs (3,760 kg)
Maximum Digging Depth
11 ft 6 in (3,505 mm)
Maximum Dump Height
12 ft 6.7 in (3,828 mm)
Maximum Reach
18 ft 5 in (5,612 mm)
Maximum Bucket Breakout Force
9,959 lbs (4,517 kg)
Maximum Arm Digging Force
4,114 lbs (1,866 kg)
Arm Length
5 ft 3 in (1,600 mm)
Slew speed
10.1 rpm
Traction Force
9,533 lbs (4,324 kg)
ENGINE
Make/Model
 Yanmar / 4TNV88C
Tier Rating
EPA Final Tier 4
Cylinders/Displacement
 4 / 133.6 cu in (2.2 L)
Horsepower
 35.8 hp (26.7 Kw)
Rated Engine Speed
 2,200 rpm
Maximum Torque
 102.6 ft-lb @ 1,430 rpm (139.1 Nm)
Engine Lubrication
 5.0 qt (4.7 L)
Cooling System
 9.2 qt (8.7 L)
Fuel Tank Capacity
 14.0 gal (53.0 L)
Fuel Consumption (65% of full load)
 1.2 gal / hr (4.8 L/hr)
Electrical System
 12 volts / 40 amps
UNDERCARRIAGE
Traction Drive Type   
Planetary reduction with automatic shift down
Parking Brake
Spring applied, hydraulically released, multiple wet friction disk
Track Roller Type
Permanently sealed, triple flanged rollers
Track Rollers (per side)
 4
Track Width
 13.8 in (350 mm)
Track Ground Contact Length 
5 ft 5.1 in (1,653 mm)
Ground Pressure
3.9 psi (26.2 kPa)
Maximum Travel Speed
 
 Low Range
1.7 mph (2.7 km/hr)
 High Range
3.0 mph (4.9 km/hr)
HYDRAULIC SYSTEM
Pump Type
Two piston pumps with two gear pumps
Total Hydraulic Flow (gpm)
 30.6 gal / min (115.8 L / min)
Primary Auxiliary Hydraulic Flow 
 17.1 gal / min (64.9 L / min)
Main Relief Hydraulic Pressure
 3,481 psi (24.0 MPa)
Hydraulic Reservoir Capacity
 9.2 gal (35.0 L)
Hydraulic System Capacity
 17.7 gal (67.0 L)
DIMENSIONS
Max Dig Depth
 11 ft 4.3 in (3,462 mm)
Max Dump Height
 12 ft 6.7 in (3,828 mm)
Max Reach Ground Level
 18 ft 0 in (5,500 mm)
Max Vertical Dig Depth
8 ft 9.2 in (2,673 mm)
Width
 5 ft 8.5 in (1,740 mm)
Height
 8 ft 0 in (2,445 mm)
Length (Transport)
 16 ft 6 in (5,020 mm)
Ground Clearance
 11.6 in (295 mm)
Dozer Blade Height
15.5 in (395 mm)
Independent Boom Swing Angle 
76° Left / 58° Right
Minimum Front Swing Radius (Straight)
6 ft 8.2 in (2,037 mm)
Minimum Front Swing Radius (Offset)
 5 ft 4 in (1,626 mm)
Tail Swing Radius
4 ft 5.1 in (1,350 mm)
FEATURES

ENGINE

  • EPA Final Tier 4 compliant with DPF
  • Automatic fuel bleed system
  • Extended life coolant
  • Dual element air cleaners
  • Automatic idle
  • Engine modes include: Power, Eco and High Altitude
  • Engine preheat starting aid
  • High capacity radiator
  • High capacity fuel filters

ELECTRICAL

  • Multi-information display includes: digital gauges for coolant temperature, fuel / water sensor, high engine coolant temperature, engine air filter restriction, fuel filter restriction, low fuel level, automatic idle, regeneration status, engine preheat, travel speed indicator, work light indicator
  • 12 Volt system with 40 amp alternator
  • Multi-function switch bank
  • Front and right side halogen work lights
  • Travel alarm
  • Horn

UNDERCARRIAGE and FRAME

  • Triple flanged track rollers
  • 2-Speed travel with automatic shift
  • High torque planetary final drives
  • Heavy duty dozer blade with float
  • Large wrap around counterweight
  • 13.8" Rubber tracks
  • Available 13.8" Steel tracks
  • Available power angle blade with float and bolt-on cutting edge

HYDRAULIC

  • Variable displacement, pressure compensating pump
  • Cushioned boom, arm, and swing cylinders
  • Precise and responsive pilot controls with proportional slide switch for auxiliary circuit
  • Large hydraulic reservoir with fluid level sight gauge
  • Primary auxiliary hydraulic circuit plumbed to arm
  • Selectable one-way and two-way auxiliary operation
  • Auxiliary detent (primary circuit)
  • Primary auxiliary circuit with in cab flow adjustments
  • Pilot accumulator
  • High capacity hydraulic oil cooler

WORKING EQUIPMENT

  • Single boom cyliinder
  • Long arm with integrated thumb mount
  • Available dual pin position bucket
  • Available mechanical bucket quick coupler
  • Available main pin hydraulic thumb

OPERATOR'S STATION

  • ROPS / TOPS / FOPS Four post canopy
  • Tilt-up Operator Station
  • Deluxe high back suspension seat
  • Quick change control pattern (ISO or SAE)
  • Proportional slide switch for auxiliary hydraulics
  • 2"  retractable seat belt
  • Available 3" seat belt
  • Available cab with air conditioner, heat, defrost, windshield wiper and washer, AM / FM / MP3 radio, top view glass with sunshade

©2014 Takeuchi Manufacturing [US], Ltd. All Rights Reserved.
Equipment depicted on this website may include optional equipment.