|
The TW50, TW65, and TW80 have a compact design that allows them to easily maneuver in tight spaces with minimal damage to lawns, pavement, or other sensitive surfaces. They provide incredible reach and dump height for outstanding material handling, and the spacious operator's station is elevated giving the operator greater visibility and jobsite awareness. These wheel loaders deliver power and precise control for increased productivity, and lower operational and maintenance costs which make them a great alternative to skid steer loaders. So, whether you are loading mulch and sod, removing snow, feeding hoppers, or sorting and stockpiling material, you will find Takeuchi wheel loaders are an ideal choice for a variety of applications.
Click the links below to view product specifications.
 OPERATING PERFORMANCE
-
|
Loader Boom Linkage Type
|
Z-pattern
|
|
Operating Weight (w 165 lb operator) Standard machine with bucket
|
12,677 lb (5,750 kg)
|
|
Tipping Load, Straight
|
9,420 lb (4,273 kg)
|
|
Tipping Load, Full Turn
|
8,294 lb (3,762 kg)
|
|
Rated Operating Capacity with bucket * (SAE J818)
|
4,147 lb (1,881 kg)
|
|
Bucket Breakout Force
|
15,287 lb (6,934 kg)
|
|
Lift Arm Breakout Force
|
13,567 lb (6,154 kg)
|
|
Traction Force
|
11,802 lb (5,354 kg)
|
|
Cycle Time
|
|
|
Raise - Full Load
|
6.0 (Seconds)
|
|
Lower - No Load
|
3.8 (Seconds)
|
|
Dump - Full Load
|
1.2 (Seconds)
|
|
*Operating Capacity is 50% of full turn tipping load with bucket according to SAE J818
|
- ENGINE
-
|
Make/Model
|
Deutz TD2011 Oil Cooled
|
|
Tier Rating
|
Tier 3
|
|
Cylinders/Displacement
|
4/221 cu in (3.62 L)
|
|
Horsepower Gross (SAE J1995)
|
80 hp (59.5 kW)
|
|
Horsepower Net (SAE 1349)
|
76 hp (57.1 kW)
|
|
Rated Engine Speed
|
2,600 rpm
|
|
Maximum Torque
|
177 ft-lb @ 1,600 rpm (240 Nm)
|
|
Engine Lubrication
|
11.6 qt (11.0 L)
|
|
Fuel Tank Capacity
|
26.4 gal (100 L)
|
|
Fuel Consumption (65% of full load)
|
2.9 gal/hr (11.0 L/hr)
|
|
Electrical System
|
12 volts / 80 amps
|
- DRIVE TRAIN
-
|
Transmission Type
|
Hydrostatic Drive with 100% Hydraulic Inching Pedal
|
|
Axle Type
|
Rigid Axles With Outboard Planetary Reduction
|
|
Differential Lock
|
100% Differential Lock in Front and Rear Axles
|
|
Parking Brake
|
Spring Applied, Hydraulically Released, Multiple Wet Friction Disk
|
|
Service Brakes
|
Hydrostatic and Multi Wet Friction Disk
|
|
Tire Gauge
|
5 ft 4 in (1,640 mm)
|
|
Steering Articulation
|
40 Degrees Left / 40 Degrees Right
|
|
Frame Oscillation
|
12 Degrees Left / 12 Degrees Right
|
|
Maximum Travel Speed
|
|
|
Low Range
|
4.0 mph (6.5 km/hr)
|
|
High Range
|
12.4 mph (20 km/hr)
|
- HYDRAULIC SYSTEM
-
|
Hydraulic Reservoir Capacity
|
19.8 gal (75.0 L)
|
|
Auxiliary Hydraulic Flow
|
18.5 gal/min (70 L/min)
|
|
Auxiliary Hydraulic Pressure
|
4,061 psi (28.0 MPa)
|
- DIMENSIONS
-
|
Wheelbase
|
7 ft 2 in (2,180 mm)
|
|
Outside Turning Radius
|
13 ft 3 in (4,046 mm)
|
|
Max Lift Height to Bucket Pin
|
11 ft 1 in (3,380 mm)
|
|
Bucket Clearance Height
|
9 ft 11 in (3,025 mm)
|
|
Dump Height Fully Raised
|
8 ft 6 in (2,605 mm)
|
|
Max Dump Angle Fully Raised
|
45 Degrees
|
|
Max Bucket Rollback at Ground Level
|
48 Degrees
|
|
Reach Fully Raised
|
2 ft 5 in (740 mm)
|
|
Overall Width Without Bucket
|
6 ft 9 in (2,050 mm)
|
|
Overall Height
|
8 ft 10 in (2,685 mm)
|
|
Overall Length With Bucket
|
18 ft 3 in (5,580 mm)
|
|
Minimum Ground Clearance
|
18 in (460 mm)
|
|
Loader operating information and dimensions are based on the standard machnine configuration, 1.3 cu. yd. bucket, 400 170 R20 tires, 165 lb (75 kg) operator.This information is affected by different configurations and attachments.
|
- FEATURES
-
ENGINE
- EPA Tier 3 compliant, turbocharged, oil cooled
- Dual element air cleaners with restriction indicator
- High capacity engine oil cooler
ELECTRICAL
- Electronic engine monitoring system with fuel gauge, high beam indicator, turn signal indicators, high speed indicator
- 12 Volt system with 80 amp alternator
- Work lights, front and rear
- Driving lights and turn signals
- Directional lights, Fwd / Rev
- Engine preheat
- Back-up alarm
- Horn
DRIVE TRAIN
- Hydrostatic drive with 100% inching pedal
- 100% Locking differentials, front and rear
- Outboard planetary drives
- 2-Speed travel
- Spring applied parking brake
- Multi wet disc brake
- Available Heavy duty construction tire assembly
- Available Flotation tire assembly
HYDRAULIC
- Pilot controls
- Heavy duty hydraulic quick attach coupler
- Auxiliary lines plumbed to the end of the loader arms
- Auxiliary hydraulic detent
- Hydraulic system test ports
- Hydraulic oil level sight gauge
- Remote mounted hydraulic oil cooler
WORKING EQUIPMENT
- Z-bar loader linkage
- Bucket float function
- Mechanical bucket positioning
- Hydraulic bucket quick coupler
- Available 81.5" GP Combo bucket (1.30 cu yd)
- Available Combo hitch to universal SSL adaptor
- Available HD 48" Pallet forks and frame
- Available Flat face hydraulic coupler kit
OPERATOR'S STATION
- ROPS / FOPS Level 2 Cab with front and rear wipers, rear window defrost, and heater
- 2" Retractable seat belt
- Adjustable suspension seat with arm rest
- Large steps and grab handles
- Elevated operator's station
- Multi-function joystick for machine direction (Fwd / Rev), and loader controls (Raise, Lower, Curl, Dump)
- Available Air conditioner
- Available 3" seat belt
|
©2013 Takeuchi Manufacturing [US], Ltd. All Rights Reserved.