TW80

OPERATING PERFORMANCE

Loader Boom Linkage Type	Z-pattern
Operating Weight (w 165 lb operator) Standard machine with bucket	12,677 lb (5,750 kg)
Tipping Load, Straight	9,420 lb (4,273 kg)
Tipping Load, Full Turn	8,294 lb (3,762 kg)
Rated Operating Capacity with bucket * (SAE J818)	4,147 lb (1,881 kg)
Bucket Breakout Force	15,287 lb (6,934 kg)
Lift Arm Breakout Force	13,567 lb (6,154 kg)
Traction Force	11,802 lb (5,354 kg)
Cycle Time
Raise - Full Load (Seconds)	6.0
Lower - No Load (Seconds)	3.8
Dump - Full Load ( Seconds)	1.2
*Operating Capacity is 50% of full turn tipping load with bucket according to SAE J818

ENGINE

Make/Model	Deutz TD2011 Oil Cooled
Tier Rating	Tier 3
Cylinders/Displacement	4/221 cu in (3.62L)
Horsepower Gross (SAE J1995)	80 hp (59.5 Kw)
Horsepower Net (SAE 1349)	76 hp (57.1 Kw)
Rated Engine Speed	2600 rpm
Maximum Torque	177 ft-lb @ 1600 rpm (240 Nm)
Engine Lubrication	11.6 qt (11.0L)
Fuel Tank Capacity	26.4 gal (100L)
Fuel Consumption (65% of full load)	2.9 gal/hr (11.0L/hr)
Electrical System	12 volts / 80 amps

DRIVE TRAIN

Transmission Type	Hydrostatic Drive with 100% Hydraulic Inching Pedal
Axle Type	Rigid Axles With Outboard Planetary Reduction
Differential Lock	100% Differential Lock in Front and Rear Axles
Parking Brake	Spring Applied, Hydraulically Released, Multiple Wet Friction Disk
Service Brakes	Hydrostatic + Multi Wet Friction Disk
Tire Gauge	5 ft 4 in (1,640mm)
Steering Articulation	40 Degrees Left / 40 Degrees Right
Frame Oscillation	12 Degrees Left / 12 Degrees Right
Maximum Travel Speed
Low Range	4.0 mph (6.5 km/hr)
High Range	12.4 mph (20 km/hr)

HYDRAULIC SYSTEM

Hydraulic Reservoir Capacity	19.8 gal (75.0L)
Auxiliary Hydraulic Flow	18.5 gal/min (70L/min)
Auxiliary Hydraulic Pressure	4,061 psi (28,000 k/Pa)

DIMENSIONS

Wheelbase	7 ft 2 in (2180 mm)
Outside Turning Radius	13 ft 3 in (4046 mm)
Max Lift Height to Bucket Pin	11 ft 1 in (3380 mm)
Bucket Clearance Height	9 ft 11 in (3025 mm)
Dump Height Fully Raised	8 ft 6 in (2605 mm)
Max Dump Angle Fully Raised	45 Degrees
Max Bucket Rollback at Ground Level	48 Degrees
Reach Fully Raised	2 ft 5 in (740 mm)
Overall Width Without Bucket	6 ft 9 in (2050 mm)
Overall Height	8 ft 10 in (2685 mm)
Overall Length With Bucket	18 ft 3 in (5580 mm)
Minimum Ground Clearance	18 in (460 mm)
Loader operating information and dimensions are based on the standard machnine configuration, 1.3 cu. yd. bucket, 400 170 R20 tires, 165 lb (75 kg) operator. This information is affected by different configurations and attachments.

FEATURES

• Takeuchi’s Z-pattern lift geometry offers the highest bucket breakout and loader lift force in its class
• Outboard planetary drive provides best-in-class traction force
• Self-aligning loader bushings with oversized pins
• Centrally located grease points
• Heavy-duty hydraulic quick attach coupler
• Push button direction control
• Tilt steering column
• Bucket float function
• Automatic bucket positioning
• EPA Tier 3 engine that is efficient and quiet
• Turbocharged engine
• Dual element air cleaner with restriction indicator
• High capacity engine oil cooler
• 12 volt electrical system with high output charging system
• Hydrostatic drive with 100% inching pedal
• 100% locking differential in front and rear axles
• Standard 2-speed travel
• Rear tires follow the same track as the front
• Remote mounted hydraulic oil cooler
• Auxiliary hydraulic lines plumbed to the bottom of the loader arms
• Auxiliary hydraulic detent
• Hydraulic system test ports
• Hydraulic oil level sight gauge
• Excellent dump height
• Tilt-up, lockable engine cover
• Standard safety features include: ROPS and FOPS Level ll, enclosed operators cabin, back-up alarm, retractable seat belt, front and rear work lights, horn, lift arm safety stop, rear view mirrors, large steps and grab handles
• Tie down and lifting points integrated into the frame
• Curved rear counterweight provides excellent balance
• Enclosed operators station that is equipped with standard: suspension seat, adjustable arm rest, easy to operate pilot controls, front and rear wipers, rear window defrost, and cabin heater (optional air conditioning)
• Dual side cab entry
• Front and rear fenders and front mud flaps
• 2 year/2000 hour full machine warranty