TW65

Click the links below to view product specifications.

OPERATING PERFORMANCE

Loader Boom Linkage Type	Z-pattern
Operating Weight (w 165 lb operator) Standard machine with bucket	10,582 lb (4,800 kg)
Tipping Load, Straight	8,073 lb (3,800 kg)
Tipping Load, Full Turn	7,143 lb (3,240 kg)
ROC with bucket * (SAE J818)	3,572 lb (1,620 kg)
Bucket Breakout Force	11,600 lb (5,262 kg)
Lift Arm Breakout Force	10,319 lb (4,680 kg)
Traction Force	9,217 lb (4,180 kg)
Cycle Time
Raise - Full Load	5.8 (Seconds)
Lower - No Load	3.5 (Seconds)
Dump - Full Load	1.7 (Seconds)
*Operating Capacity is 50% of full turn tipping load with bucket according to SAE J818

ENGINE

Make/Model	Deutz TD2011 Oil Cooled
Tier Rating	Interim Tier 4
Cylinders/Displacement	4/221 cu in (3.62 L)
Horsepower Gross (SAE J1995)	69 hp (51.3 kW)
Horsepower Net (SAE 1349)	67 hp (50.0 kW)
Rated Engine Speed	2,200 rpm
Maximum Torque	177 ft-lb @ 1,600 rpm (240 Nm)
Engine Lubrication	11.6 qt (11.0 L)
Fuel Tank Capacity	26.4 gal (100 L)
Fuel Consumption (65% of full load)	2.5 gal/hr (9.5 L/hr)
Electrical System	12 volts / 80 amps

DRIVE TRAIN

Transmission Type	Hydrostatic Drive with 100% Hydraulic Inching Pedal
Axle Type	Rigid Axles With Outboard Planetary Reduction
Differential Lock	100% Differential Lock in Front and Rear Axles
Parking Brake	Spring Applied, Hydraulically Released, Multiple Wet Friction Disk
Service Brakes	Hydrostatic and Multi Wet Friction Disk
Tire Gauge	4 ft 11 in (1,510mm)
Steering Articulation	40 Degrees Left / 40 Degrees Right
Frame Oscillation	12 Degrees Left / 12 Degrees Right
Maximum Travel Speed
Low Range	4.0 mph (6.5 km/hr)
High Range	12.4 mph (20 km/hr)

HYDRAULIC SYSTEM

Hydraulic Reservoir Capacity	13.7 gal (52.0 L)
Auxiliary Hydraulic Flow	15.8 gal/min (60 L/min)
Auxiliary Hydraulic Pressure	3,844 psi (26.5 MPa)

DIMENSIONS

Wheelbase	6 ft 6 in (2,000 mm)
Outside Turning Radius	12 ft 2 in (3,715 mm)
Max Lift Height to Bucket Pin	10 ft 5 in (3,170 mm)
Bucket Clearence Height	9 ft 1 in (2,800 mm)
Dump Height Fully Raised	8 ft 0 in (2,465 mm)
Max Dump Angle Fully Raised	45 Degrees
Max Bucket Rollback at Ground Level	48 Degrees
Reach Fully Raised	2 ft .6 in (624 mm)
Overall Width Without Bucket	6 ft 1.5 in (1,869 mm)
Overall Height	8 ft 8.5 in (2,652 mm)
Overall Length With Bucket	17 ft 2 in (5,230 mm)
Minimum Ground Clearance	17 in (450 mm)
Loader operating information and dimensions are based on the standard machnine configuration, 1.05 cu. yd. bucket, 15-19.5 tires, 165 lb (75 kg) operator.  This information is affected by different configurations and attachments.

FEATURES

ENGINE

• EPA Interim Tier 4 compliant, turbocharged, oil cooled
• Dual element air cleaners with restriction indicator
• High capacity engine oil cooler

ELECTRICAL

• Electronic engine monitoring system with fuel gauge, high beam indicator, turn signal indicators, high speed indicator
• 12 Volt system with 80 amp alternator
• Work lights, front and rear
• Driving lights and turn signals
• Directional lights, Fwd / Rev
• Engine preheat
• Back-up alarm
• Horn

DRIVE TRAIN

• Hydrostatic drive with 100% inching pedal
• 100% Locking differentials, front and rear
• Outboard planetary drives
• 2-Speed travel
• Spring applied parking brake
• Multi wet disc brake
• Available Heavy duty construction tire assembly
• Available Flotation tire assembly

HYDRAULIC

• Pilot controls
• Heavy duty hydraulic quick attach coupler
• Auxiliary lines plumbed to the end of the loader arms
• Auxiliary hydraulic detent
• Hydraulic system test ports
• Hydraulic oil level sight gauge
• Remote mounted hydraulic oil cooler

WORKING EQUIPMENT

• Z-bar loader linkage
• Bucket float function
• Mechanical bucket positioning
• Hydraulic bucket quick coupler
• Available 77" Construction combo bucket (1.05 cu yd)
• Available Combo hitch to universal SSL adaptor
• Available HD 48" Pallet forks and frame
• Available Flat face hydraulic coupler kit

OPERATOR'S STATION

• ROPS / FOPS Level 2 Cab with front and rear wipers, rear window defrost, and heater
• 2" Retractable seat belt
• Adjustable suspension seat with arm rest
• Large steps and grab handles
• Elevated operator's station
• Multi-function joystick for machine direction (Fwd / Rev), and loader controls (Raise, Lower, Curl, Dump)
• Air conditioner
• Available 3" seat belt