Takeuchi US
Home » Products » Archive » Wheel Loaders » TW50


The TW50, TW65, and TW80 have a compact design that allows them to easily maneuver in tight spaces with minimal damage to lawns, pavement, or other sensitive surfaces.  They provide incredible reach and dump height for outstanding material handling, and the spacious operator's station is elevated giving the operator greater visibility and jobsite awareness.  These wheel loaders deliver power and precise control for increased productivity, and lower operational and maintenance costs which make them a great alternative to skid steer loaders.  So, whether you are loading mulch and sod, removing snow, feeding hoppers, or sorting and stockpiling material, you will find Takeuchi wheel loaders are an ideal choice for a variety of applications. 

Click the links below to view product specifications.

Loader Boom Linkage Type
Operating Weight (w 165 lb operator)           Standard machine with bucket
 Cab 8,708 lb (3,950 kg)
Tipping Load, Straight
6,790 lb (3,080 kg)
Tipping Load, Full Turn
 5,975 lb (2,710 kg)
ROC with bucket * (SAE J818)
 2,987 lb (1,355 kg)
Bucket Breakout Force
8,992 lb (4,079 kg)
Lift Arm Breakout Force
7,644 lb (3,467 kg)
Traction Force
8,543 lb (3,875 kg)
Cycle Time
   Raise - Full Load
 5 (Seconds)   
   Lower - No Load
 4 (Seconds)   
   Dump - Full Load 
 1.5 (Seconds)   
*Operating capacity is 50% of full turn tipping load with bucket according to SAE J818 
Deutz TD2009 Water Cooled
Tier Rating
  EPA Interim Tier 4
 4/140 cu in (2.29 L)
 57 hp (42 kW)
Rated Engine Speed
 2,200 rpm
Maximum Torque
 147.5 ft-lb @ 1,500 rpm (200 Nm)
Engine Lubrication
 10.6 qt (10 L)
Cooling system (Water)
 4.8 qt (4.5 L)
Fuel Tank Capacity
 16.2 gal (61.5 L)
Fuel Consumption (65% of full load)
 1.9 gal/hr (7.2 L/hr)
Electrical System
 12 volts / 50 amps
Transmission Type
 Hydrostatic Drive with 100% Hydraulic Inching Pedal
Axle Type
 Rigid Axles With Outboard Planetary Reduction
Differential Lock
 100% Differential Lock in Front and Rear Axles
Parking Brake
Spring Applied Hydraulically Released Multi Wet Friction Disc
Service Brakes
 Hydrostatic and Multi Wet Friction Disc
Tracking Width
 52.4 in (1,330 mm)
Steering Articulation
 40 Degrees Left / 40 Degrees Right
Frame Oscillation
12 Degrees Left / 12 Degrees Right
Maximum Travel Speed
Low Range
4 mph (6.5 km/hr)
High Range
12.4 mph (20 km/hr)
Hydraulic Reservoir Capacity
15.9 gal (60 L)
Auxiliary Hydraulic Flow
 14.5 gal/min (55 L/min)
Auxiliary Hydraulic Pressure
 3,336 psi (23.0 MPa)
 6 ft 6 in (1,988 mm)
Outside Turning Radius
11 ft 10.6 in (3,622 mm)
Max Lift Height to Bucket Pin
 10 ft 8.7 in (3,270 mm)
Bucket Clearance Height
 9 ft 7 in (2,920 mm)
Dump Height Fully Raised
 8 ft 4 in (2,550 mm)
Max Dump Angle Fully Raised
 45 Degrees
Max Bucket Rollback at Ground Level
 48 Degrees
Reach Fully Raised
 13.4 in (340 mm)
Overall Width Without Bucket
 5 ft 10 in (1,785 mm)
Overall Height
 8 ft 2 in (2,487 mm)
Overall Length With Bucket
 16 ft 10.4 in (5,140 mm)
Minimum Ground Clearance
 17.3 in (440 mm)
Loader operating information and dimensions are based on the standard machnine configuration, 1.05 cu. yd. bucket, 15-19.5 tires, 165 lb (75 kg) operator.  This information is affected by different configurations and attachments. 


  • EPA Interim Tier 4 compliant, water cooled
  • Extended life coolant
  • Dual element air cleaners with restriction indicator
  • Heavy duty radiator and oil cooler


  • Electronic engine monitoring system with fuel gauge, high beam indicator, turn signal indicators, high speed indicator
  • 12 Volt system with 50 amp alternator
  • Work lights, front and rear
  • Driving lights and turn signals
  • Directional lights, Fwd / Rev
  • Engine preheat
  • Back-up alarm
  • Horn


  • Hydrostatic drive with 100% inching pedal
  • 100% Locking differentials, front and rear
  • Outboard planetary drives
  • 2-Speed travel
  • Spring applied parking brake
  • Multi wet disc brake
  • Available Heavy duty construction tire assembly
  • Available Flotation tire assembly


  • Heavy duty hydraulic quick attach coupler
  • Auxiliary lines plumbed to the end of the loader arms
  • Auxiliary hydraulic detent
  • Hydraulic system test ports
  • Hydraulic oil level sight gauge


  • Parallel lift geometry
  • Bucket float function
  • Mechanical bucket positioning
  • Hydraulic bucket quick coupler
  • Available 71" Combo bucket (1.11 cu yd)
  • Available 77" Construction combo bucket (1.05 cu yd)
  • Available Combo hitch to universal SSL adaptor
  • Available HD 48" Pallet forks and frame
  • Available Flat face hydraulic coupler kit


  • ROPS / FOPS Level 2 Cab with heater
  • 2" Retractable seat belt
  • Adjustable suspension seat with arm rest
  • Large steps and grab handles
  • Elevated operator's station
  • Multi-function joystick for machine direction (Fwd / Rev), and loader controls (Raise, Lower, Curl, Dump)
  • Available 3" seat belt

©2017 Takeuchi Manufacturing [US], Ltd. All Rights Reserved.
Equipment depicted on this website may include optional equipment.