Takeuchi US
Home » Products » Archive » Track Loaders » TL250


The sturdy all welded frame and heavy duty oversized undercarriage of the Takeuchi TL250 compact track loader provides hours of reliable service.  An unrivaled blend of floatation, traction, and breakout force allows the TL250 to power through the most difficult material with ease.  The operator's station offers low effort pilot controls and proportional auxiliary switches to give the operator the precision needed to work more efficiently in a comfortable fatigue free environment.  Power and maneuverability make the TL250 an excellent choice for any size job that requires unsurpassed performance.

Click the links below to view product specifications.

Operating Weight (w 165 lb operator)
Standard machine with bucket
 Canopy 11,630 lb (5,275 kg)
Cab 11,905 lb (5,400kg)
Tipping Load
7,496 lb (3,400 kg)
ROC (SAE J818 standard 35% tipping load*)
2,624 lb (1,190 kg)
Operating Load at 50% of Tipping Load
3,748 lb (1,700 kg)
ROC with Optional Counterweight
2,900 lb (1,315 kg)
Bucket Breakout Force
8,692 lb (3,925 kg)
Lift Arm Breakout Force
8,549 lb (3,877 kg)
Traction Force
13,758 lb (6,245 kg)
Capacity SAE Heaped (Bucket optional)
24 cu ft (0.70m3)
Cycle Time
    Raise-Full Load
4.6 (Seconds)   
    Lower-No Load
2.8 (Seconds)   
    Dump-Full Load
3.1 (Seconds)   
    Curl-No Load
2.3 (Seconds)   
*Operating capacity of track loaders to be rated according to SAE J818 at no more than 35% of the tipping load
Kubota V3800DI-Turbo
Tier Rating
 EPA Tier 3
 4/230 cu in (3.8 L)
 98 hp (73.1 kW)
Rated Engine Speed
 2,600 rpm
Maximum Torque
 231 ft-lb @ 1,600rpm (313 Nm)
Engine Lubrication
 14 qt (13.2 L)
Cooling System
 17.4 qt (16.5 L)
Fuel Tank Capacity
 28.5 gal (108 L)
Fuel Consumption (65% of full load)
 3.7 gal/hr (14 L/hr)
Electrical System
 12 volts / 80 amps
Traction Drive Type
Hydrostatic drive system with double reduction planetary final drive
Parking Brake
Spring applied, hydraulically released, multiple wet friction disk
Track Roller Type
Large, outside running, permanently sealed rollers with precision metal face seals
Track Rollers (per side)
Track Width
17.7 in (450 mm)
Track Ground Contact Length
5 ft 2.7 in (1,595 mm)
Ground Pressure (psi)
Canopy        Cab
4.7         4.8
Maximum Travel Speed
Low Range
4.8 mph (7.8 km/hr)
High Range
7.5 mph (12.0 km/hr)
Hydraulic Reservoir Capacity
15.9 gal (60 L)
Hydraulic System Capacity
 25.1 gal (65 L)
Auxiliary Hydraulic Flow
 23.4 gal/min (88.7 L/min)
Auxiliary Hydraulic Flow - Optional High Flow
 40 gal/min (152 L/min)
Auxiliary Hydraulic Pressure
 3,000 psi (20.6 MPa)
Front Clearance Radius with Bucket 
7 ft 11.8 in (2,435 mm)
Rear Clearance Radius
 5 ft 9 in (1,755 mm)
Angle of Departure
 30 degrees
Maximum Lift Height to Bucket Pin
 10 ft 6 in (3,205 mm)
Dump Height Fully Raised 
7 ft 11.7 in (2,430 mm)
Maximum Dump Angle Fully Raised
 38 degrees
Maximum Bucket Rollback at Ground Level
 30 degrees
Reach Fully Raised
 3 ft 2.7 in (985 mm)
Overall Width Without Bucket
 6 ft 1.2 in (1,860 mm)
Recommended Bucket Width
 80 in (2,032 mm)
Overall Height
 7 ft 7 in (2,320 mm)
Overall Length with Bucket
 13 ft 3 in (4,038 mm)
Minimum Ground Clearance
 13.5 in (345 mm)


  • EPA Tier 3 compliant
  • Turbocharged
  • Automatic fuel bleed system
  • Extended life coolant
  • Dual element air filter with pre-cleaner


  • Electronic engine monitoring system with fuel and coolant temperature gauge
  • 12 Volt system with 80 amp alternator
  • Halogen work lights, front and rear
  • Engine preheat
  • Hour meter
  • Back-up alarm


  • Permanently sealed track rollers with metal face seals
  • Welded track frame with multiple cross members
  • 2-speed travel
  • 17.7" rubber track with integrated steel cables and forged steel inserts
  • Grease type track adjuster


  • Cushioned boom cylinders
  • Boom float with detent
  • Pilot proportional hydraulic controls
  • Pressure relieving flat faced coupler body
  • 14-pin connector with push button control
  • Hydraulic self leveling
  • Available high flow auxiliary hydraulics, 40 gpm


  • Radial boom design
  • Mechanical quick coupler
  • Available Hydraulic quick coupler
  • Available 80" HD smooth lip dirt bucket (24 cu ft)
  • Available 80" HD dirt bucket with (9) teeth (24 cu ft)
  • Available 8' Six way dozer blade
  • Available HD 48" pallet forks
  • Available Counterweight kit (575 lbs)


  • Tilt-up operator station
  • Pilot operated controls
  • Six-way adjustable suspension seat
  • Rear pivoting seat bar with integrated arm rests
  • Retractable seat belt
  • ROPS / FOPS structure
  • Available Cab with roll-up door, air conditioning, heat, defrost, and wiper
  • Available 3" seat belt
  • Available AM / FM / Mp3 radio with NOAA weatherband

©2017 Takeuchi Manufacturing [US], Ltd. All Rights Reserved.
Equipment depicted on this website may include optional equipment.